Email A PDF of this Page || View this Page as a PDF
Wall Packs
Lighting Specification Sheet
Small Wall Pack
APPLICATION:
Ideal low wattage energy saving luminaire that provides
economic cost and vandal resistance for exterior wall and area
lighting for parking areas, perimeter lighting, entrance and
walkways, loading platforms, and warehouses.
ELECTRICAL
UL and CSAUS listed for wet and damp locations.
DIFFUSER
One piece, injection molded, heat resistant clear polycarbonate
lens with UV inhibitors. Front hinged and secured with four
screws. A borosilicate molded prismatic glass lens with
die cast frame is also available.
HOUSING
One piece, heavy duty, die cast aluminum. Polyester powder
coat paint finish, BRONZE.
ORDERING INFORMATION
| Catalog Number | Wattage | Voltage/Ballast | Lbs. |
| HIGH PRESSURE SODIUM | |||
| WP35 | 35 | 120/Reactor NPF | 8 |
| WP50 | 50 | 120/Reactor NPF | 8 |
| WP70 | 70 | 120/Reactor NPF | 9 |
| WP100 | 100 | 120/Reactor NPF | 9 |
| WPG100 | 100 | 120/Reactor NPF | 12 |
| WPG150 | 150 | 120/Reactor NPF | 12 |
| METAL HALIDE | |||
| WPG70MH | 70 | 120/Reactor NPF | 15 |
| WPG100MH | 100 | 120/Reactor NPF | 15 |
| DIMENSIONS | ||
| Width | Height | Depth |
| 8 1/2" | 8 1/2" | 9" |
REFLECTOR
One piece, semi specular asymmetric anodized aluminum
for optimum efficiency.
BALLAST
Class H insulated, NPF 120v 60 Hz reactor
High pressure sodium. Metal Halide Multi-tap.
ADDITIONAL FEATURES
- Two 1/2" tapped side holes for securing conduit.
- One 1/2" tapped hole for mounting photo cell
- Porcelain medium base socket
- Optional mounting cover and threaded stem
- Lamp included
| ACCESSORIES | |
| Wire Guard suffix - WG | |
| Photo Cell - 120 volt suffix - PC | |
| Glass Lens (WPG) | |
Mini Wall Pack
APPLICATION:
Ideal low wattage energy saving luminaire that provides
economic cost and vandal resistance for exterior and interior
architectural and security lighting applications for commercial
buildings, shopping centers, schools and apartment complexes.
Also available with aborosilicate glass refractor to eliminate
discoloring.
ELECTRICAL
UL and CSAUS listed for wet and damp locations.
LENS
One piece, injection molded, heat resistant polycarbonate with UV
inhibitors to reduce yellowing.Also available with a heat resistant
molded borosilicate glass lens to eliminate discoloring.
HOUSING Polycarbonate unit comes with a one piece heavyduty, die cast aluminum back plate. Glass unit has a heavy duty, die cast aluminum housing and lensframe. Polyester powder coat finish - BRONZE.
ORDERING INFORMATION
| Catalog Number | Wattage | Voltage/Ballast | Lbs. |
| POLYCARBONATE HIGH PRESSURE SODIUM | |||
| MWP35 |
35 | 120/Reactor NPF | 4 |
| MWP50 | 50 | 120/Reactor NPF | 4 |
| MWP70 | 70 | 120/Reactor NPF | 4 |
| GLASS HIGH PRESSURE SODIUM | |||
| MWP100 | 100 | 120/Reactor NPF | 10 |
| MWP150 | 150 | 120/Reactor NPF | 11 |
| GLASS PULSE START METAL HALIDE | |||
| MWP70MH | 70 | Multi-tap HX-HPF | 13 |
| MWP100MH | 100 | Multi-tap HX-HPF | 13 |
| DIMENSIONS | |||
| Width | Height | Depth | |
| Polycarbonate | 7” | 11” | 5 1/4” |
| Glass | 7 3/4” | 13” | 5 1/2” |
REFLECTOR
One piece, semi specula asymmetrican odized aluminum for optimum efficiency.
BALLAST
Class H insulated, NPF 120v 60 Hz reactor High pressure sodium HX-HPF multi-tap 60Hz Pulse Start Metal Halide.
ADDITIONAL FEATURES
- Conduit access on bottom and back side
- Photo cell adapable
- Porcelain medium base socket
- Lamp included
| ACCESSORIES | |
| Wire Guard suffix - WG | |
| Photo Cell - 120 volt suffix - PC | |
| Photo Cell 208-277 volt suffix -PC2 | |
Medium Wall Pack
APPLICATION:
Ideal high wattage luminaire for mounting heights below 15 feet for exterior wall and area lighting for parking areas, perimeter lighting, entrance and walkways, loading platforms, and warehouses. Special energy efficient Uni-form Pulse Start Metal Halide ballast and lamps are also available.
ELECTRICAL
UL and CSAUS listed for wet and damp locations.
LENS
One piece, high impact, heat resistant, borosilicate glass for wide spread distribution of light.
HOUSING
Die cast housing with a Borosilicate molded glass lens, gasket, chromate conversion coating, and a textured bronze finish.
ORDERING INFORMATION
| Catalog Number | Wattage | Voltage/Ballast |
| HIGH PRESSURE SODIUM | ||
| WP150 |
150 | 120 Volt |
| WP150MT | 150 | Multi-Tap |
| METAL HALIDE | ||
| WP50MH | 50 | Multi-tap |
| WP70MH | 70 | Multi-tap |
| WP100MH | 100 | Multi-tap |
| WP175MH | 175 | Multi-tap |
| WP175PSMH | 175 | Multi-tap |
| DIMENSIONS | |||
| Width | Height | Depth | |
| WP15 | 14” | 9” | 7” |
REFLECTOR
The medium wall pack has a combination barrier-reflector.
BALLAST
Class H insulated, NPF 120v 60Hz reactor High pressure sodium. Metal halide Multi-tap.
ADDITIONAL FEATURES
- Medium Base socket and bracket
- Reusable Styrofoam and inner carton
| ACCESSORIES | |
| Wire Guard | |
| Full Cut Off* | |
| Side Cut Off* | |
| Polycarbonate Guard | |
| * Specify "A" for Aluminum and "S" for Steel | |
Large Wall Pack
APPLICATION:
Ideal high wattage luminaire for mounting heights above 15 feet for exterior wall and area lighting for parking areas, perimeter lighting, entrance and walkways, loading platforms, and warehouses. Special energy efficient Uni-form Pulse Start Metal Halide ballast and lamps are also available.
ELECTRICAL
UL and CSAUS listed for wet and damp locations.
LENS
One piece, high impact, heat resistant, borosilicate glass for wide spread distribution of light.
HOUSING
Two piece heavy duty die cast aluminum. Face frame is hinged and secured to back box with two stainless steel screws. This design allows for easy access for relamping. Polyester powder coat paint finish, BRONZE.
ORDERING INFORMATION
| Catalog Number | Wattage | Voltage/Ballast | Lbs. |
| HIGH PRESSURE SODIUM | |||
| WP250 |
250 | Multi-Tap | 31 |
| WP400 | 400 | Multi-Tap | 31 |
| METAL HALIDE | |||
| WP250MH | 250 | Multi-Tap | 29 |
| WP400MH | 400 | Multi-Tap | 31 |
| PULSE START METAL HALIDE | |||
| WP200MH | 200 | Multi-tap | 31 |
| WP250PSMH | 250 | Multi-tap | 31 |
| WP300MH | 300 | Multi-tap | 31 |
| WP320MH | 320 | Multi-tap | 31 |
| WP350MH | 350 | Multi-tap | 32 |
| WP400PSMH | 400 | Multi-tap | 32 |
| DIMENSIONS | |||
| Width | Height | Depth | |
| 18" | 9” | 12 3/4” | |
REFLECTOR
One piece stippled asymmetric anodized aluminum designed in conjunction with the diffuser for efficient light distribution.
BALLAST
Class H insulated, CWA Multi-tap 60Hz.
ADDITIONAL FEATURES
- Two 1/2" tapped side holes for securing conduit.
- One 1/2" tapped hole for mounting photo cell
- Porcelain Mogul socket
| ACCESSORIES | |
| Wire Guard suffix - WG | |
| Photo Cell - 120 volt suffix - PC | |
| Photo Cell 208-277 volt suffix - PC2 | |
| Polycarbonate Guard - PG | |
Constellation “Full Cutoff ”
Wall Packs
APPLICATION:
Parking areas, perimeter lighting, entrance and walkways, waterfronts, loading platforms, recreational areas.
ELECTRICAL
UL and CSAUS listed for wet and damp locations.
HOUSING
Die Cast front and rear housing with tempered glass lens and built-in template for mounting to an electrical box. There is a chromate conversion coating with a textured bronze finish.
ORDERING INFORMATION
| Catalog Number | Wattage | Voltage/Ballast |
| METAL HALIDE | ||
| WPFC100MH | 100 | Multi-Tap |
| WPFC150MH | 150 | Multi-Tap |
| WPFC175MH | 175 | Multi-Tap |
| WPFC175MH | 175 | Multi-Tap |
| WPFC250MH | 250 | Multi-Tap |
| WPFC400MH | 400 | Multi-Tap |
| WPFC320MH | 320 | Multi-Tap |
| HIGH PRESSURE SODIUM | ||
| WPFC150 | 150 | 120 Volt |
| WPFC250 | 250 | Multi-tap |
| WPFC400 | 400 | Multi-tap |
| DIMENSIONS | |||
| Width | Height | Depth | |
| WPFC175 | 14 1/4 " | 9 1/8 ” | 11 3/8” |
| WPFC250 | 18 1/4 " | 9 1/8 ” | 11 3/4” |
| WPFC150 | 18 1/4 " | 9 1/8 ” | 7 1/8” |
REFLECTOR
2-piece pinged aluminum reflector with porcelain socket and bracket.
BALLAST
Class H insulated, NPF 120v 60Hz reactor Hig
pressure sodium. Metal halide Multi-tap.
ADDITIONAL FEATURES
- Reusable Styrofoam and inner carton
- Meets local "Dark Sky" requirements
- Also available in white
| ACCESSORIES | |
| Flat Glass Lens | |
| Clear Glass | |
| Etched Glass | |
| Prismatic Glass | |
| ColorLIFE Lens | |
| ColorLIFE-YELLOW | |
| ColorLIFE-LIGHT BLUE | |
Sconce Wall Packs
APPLICATION:
Parking areas, perimeter lighting, entrance and walkways, waterfronts, loading platforms, recreational areas.
ELECTRICAL
UL and CSAUS listed for wet and damp locations.
HOUSING
Die cast housing with flat tempered prismatic glass lens, chromate conversion coating and textured bronze finish.
ORDERING INFORMATION
| Catalog Number | Wattage | Voltage/Ballast |
| METAL HALIDE | ||
| WPSC100MH | 100 | Multi-Tap |
| WPSC150MH | 150 | Multi-Tap |
| WPSC175MH | 175 | Multi-Tap |
| WPFC175MH | 175 | Multi-Tap |
| WPSC250MH | 250 | Multi-Tap |
| WPSC400MH | 400 | Multi-Tap |
| HIGH PRESSURE SODIUM | ||
| WPSC150 | 150 | 120 Volt |
| WPSC250 | 250 | Multi-tap |
| WPSC400 | 400 | Multi-tap |
| DIMENSIONS | |||
| Width | Height | Depth | |
| WPSC150 | 14 1/4" | 9” | 7 1/4” |
| WPSC250 | 18 1/8" | 9” | 12 7/8 ” |
REFLECTOR
Two-piece pinged aluminum reflector with porcelain socket and bracket.
BALLAST
Class H insulated, NPF 120v 60Hz reactor High pressure sodium. Metal halide Multi-tap.
ADDITIONAL FEATURES
- Porcelain medium base socket and bracket for medium
- Porcelain mogul base socket and bracket for large
- Semi-cutoff design
Slim Line Wall Pack
APPLICATION:
Parking areas, perimeter lighting, entrance and walkways, waterfronts, loading platforms, recreational areas.
ELECTRICAL
UL and CSAUS listed for wet and damp locations.
HOUSING
Die Cast housing and hinged front frame with a chromate conversion coating and a textured bronze finish. The Slimline Wall Pack comes with molded Borosilicate prismatic glass lens.
| Catalog Number | Wattage | Voltage/Ballast | |
| METAL HALIDE | |||
| WPSL175MH | 175 | Multi-Tap | |
| WPSL250MH | 250 | Multi-Tap | |
| WPSL400MH | 400 | Multi-Tap | |
| HIGH PRESSURE SODIUM | |||
| WPSL250 | 250 | Multi-Tap | |
| WPSL400 | 400 | Multi-Tap | |
| PULSE START METAL HALIDE | |||
| WP200MH | 200 | Multi-Tap | 31 |
| WP250PSMH | 250 | Multi-tap | 31 |
| WP300MH | 300 | Multi-tap | 31 |
| WP320MH | 320 | Multi-tap | 31 |
| WP350MH | 350 | Multi-tap | 32 |
| WP400PSMH | 400 | Multi-tap | 32 |
| DIMENSIONS | |||
| Width | Height | Depth | |
| WPSL400 | 16 1/2" | 17 3/8” | 7” |
REFLECTOR
The reflector has porcelain mogul base socket and bracket with side access to the conduit.
BALLAST
Class H insulated, NPF 120v 60Hz reactor High pressure sodium. Metal halide Multi-tap.
ADDITIONAL FEATURES
- Includes mounting plate with integral electrical box
Fluorescent Wall Pack
APPLICATION:
Parking areas, perimeter lighting, entrance and walkways, waterfronts, loading platforms, recreational areas.
ELECTRICAL
UL and CSAUS listed for wet and damp locations.
HOUSING
Die Cast housing with a chromate conversion coating and a textured bronze finish.
ORDERING INFORMATION
| Catalog Number | Lens | Wattage | Voltage/Ballast |
| WP42EL | polycarbonate | 1x 42W | 120/Reactor NPF |
| MWP42EL | borosilicate | 1x 42W | 120/Reactor NPF |
| MWP84EL | borosilicate | 2 x 42W | 120/Reactor NPF |
| MWP26 | polycarbonate | 2 x 13W | 120/Reactor NPF |
| MWP26 | borosilicate | 2 x 42 | 120/Reactor NPF |
| DIMENSIONS | |||
| Width | Height | Depth | |
| WP42EL | 8 1/2" | 9 1/2 ” | 7” |
| MWP42EL | 7 3/4" | 13” | 5 1/2” |
| MWP84EL | 7 3/4" | 13” | 5 1/2” |
| MWP26 | 6 3/4" | 11" | 5 1/4" |
| WP84EL | 14 1/4" | 9" | 7 1/4" |
REFLECTOR
The reflector is aluminum and has a fluorescent socket and bracket.
BALLAST
Class H insulated, NPF 120v 60Hz reactor High pressure sodium. Metal halide Multi-tap.
ADDITIONAL FEATURES
- Reusable Styrofoam and inner carton
- Compact Fluorescent lamps
- Heat Resistant clear polycarbonate available
| ACCESSORIES | |
| Mounting Plate - MP | |
| Wire Guard - WG | |
| Full Cut Off - FC | |
| Side Cut Off - SC | |
| Polycarbonate Guard - PC | |